Cover Feed Bar Code Reader BCR-100
|
Back
The optional cover feed bar code reader BCR-100 reads an ID code
printed on the upper side of the cover, towards the leading edge of
the cover. The normal bar code used is IRF (Interleaved 2 or 5) but
other types of bar code formats may also be used (refer to IBIS for
details) . The cover sheet is fed a short distance from the bottom
of the pile where it then stops and the code is read. If the ID number
in this code matches the ID number read on the inside sheets, then
the cover is fed into the Smart-binder folder. If there is an ID number
mismatch then the Smart-binder will stop and the control screen will
show that there has been a cover mismatch. The operator must then
regain correct cover sequence before restarting the machine.
Instead of a bar code reader, the cover feeder may alternatively be
fitted with a 2D Datamatrix code reader (option BCR-102).
It is recommended that instead of covers being individually personalized,
they are non-personalized but include a cut-out window
which allows personalised details printed on the first page of the
inside sheets to be visible from the outside of the book..
|