Smart Label-binder specifications

Note: Maximum web speed is reduced if using lightweight paper stock. The actual run speed depends on paper weight, paper quality and ECL booklet spine length and/or when producing ECL booklets which contain a small number of printed pages (example 8pp booklets)

Note: Maximum sheet arrival rate is reduced if using lightweight paper stock and/or when producing ECL booklets which contain a small number of printed pages (example: 8pp booklets)

Note: Maximum ECL booklet thickness must be reduced if the booklet width is less than about 150mm, or if feeding pre-folded sheets or using the trimmer center-knife, or using 43/6S wire stitch heads.

Note: To produce more than 312mm (12.28") spine length using a standard SLB, the side knives must be removed.

Note: Maximum untrimmed ECL booklet spine length increases to 457mm (18") if using the special 'stretched' model SLB-X. Maximum untrimmed ECL booklet width with the BWM-100 modification is 273mm (10.75")

Note: 119mm minimum trimmed width reduced to 82.5mm (3.25") with modification BWM-100 - or 75mm (2.95") if no face trim is needed.

Note: 200mm minimum trimmed spine length reduced to 91mm (3.58") if using the trimmer center-knife CKN-101

Note: The special extended model SLB-X increases the maximum length from 320mm to 457mm (18").

Note: The special BWM-100 modifications increases the maximum sheet width from 472 to 546mm (21.5")

Note:The minimum width of 250mm can be reduced to 150mm (5.9") with special BWM-100 modifications

Note: A small modification is required to the CIF-102 cover feeder to reduce the min cover width from 300mm to 250mm

Note: 300mm (11.8") is the minimum cover width with the autoloader fitted

Note: The F-100 folder is recommended when running very light weight paper stocks